Foreword, Stop – Vortech 2006-2010 6.1L Jeep SRT8 User Manual

Page 2

P/N: 4CK020-010 v6.0, 02/17/2012

FOREWORD

Take note of the following before proceeding:

1. Proper installation of this supercharger kit requires general auto-

motive mechanic knowledge and experience. Please browse through

each step of this instruction manual prior to beginning the installation

to determine if you should refer the job to a professional installer/

technician. Please contact your dealer or Vortech Engineering for

possible installers in your area.

2. This product was designed for use on stock (un-modified, OEM) vehicles.

The PCM (computer), engine, transmission, drive axle ratios and tire O.D. must

be stock. If the vehicle or engine has been modified in any way, check with

Vortech prior to installation and use of this product.

3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).

4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard

use (no boost) until the problem is resolved.

5. Vortech is not responsible for any clutch, transmission, drive-line or engine

damage.

Exclusions from Vortech warranty coverage considerations

include, but not limited to:

1. Neglect, abuse, lack of maintenance, abnormal operation or improper installa-

tion.

2. Continued operation with an impaired vehicle or sub-system.

3. The combined use of Vortech components with other modifications such as, but

not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party

PCM programming or other such changes.

into another language in any form, by any means without written permission of Vortech Engineering, Inc.

STOP

his manual provides information on the installation, maintenance and service

of the Vortech supercharger kit expressly designed for this vehicle. All infor-

mation, illustrations and specifications contained herein are based on the lat-

est product information available at the time of this publication. Changes to the

manual may be made at any time without notice. Contact Vortech Engineering for

any additional information regarding this kit and any of these modifications at (805)

247-0226 8:00am-4:30pm PST.