Vortech 2006-2010 6.1L Jeep SRT8 User Manual

Page 20

P/N: 4CK020-010 v6.0, 02/17/2012

1. Remove the hood latch, core support brack-

ets and power steering cooler from in front of

the radiator. Pull firmly on the power steering

cooler mounting clips until they come off.

2. Remove lower power steering hose from

cooler and route below wiring harness.

Re-install line to cooler using factory clamp.

3. Relocate the power steering cooler behind

the bumper using the supplied brackets. Use

the ¼” hardware to connect the brackets to

the power steering cooler.

4. Mark and drill 11/64” holes in the top of the

metal bumper. Secure with #12 sheet metal

screws.

5. Attach the supplied brackets to the CAC core

using ¼” x ½” long screws and washers.

Remove the screws securing the ac condens-

er and mount CAC core using these screws

in the middle hole in the bracket. Make sure

that CAC core is mounted with passenger

side outlet at the highest point.

Fig. 7C-a

Fig. 7C-b

Fig. 7C-c

Fig. 7C-d

NOTE: Early model year cars with core support brackets that

do not bend in an arc will need to be replaced with new

support bars available from your local dealer.

(Ref PN 55394098AE). (See Fig. 7C-d)

LATE MODEL STYLE IS REQUIRED FOR S/C KIT INSTALL

(MAY NEED TO BE PURCHASED FROM DEALER)

EARLY MODEL WON'T

FIT