D-Link DES-3624 - Manual (Page 99)

Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 99
Note: After performing the Factory Reset, make sure to redefine the IP settings for the Switch in the
Configure IP Address menu. Then perform a Restart System on the Switch. After these three
procedures are performed, your Factory Reset is complete.
Choose Factory Reset from the main menu. The following screen appears:
Figure 6-54. Factory Reset NV-RAM to Default Value screen
Logout
To exit the console program, choose Logout from the main menu. Make sure you have performed a Save
Changes if you have made changes to the settings and wish them to become defaults for the switch. After
logging out, you will be returned to the opening login screen.