D-Link DES-3624 - Manual (Page 133)

Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management 133
Console
Figure 7-32. Configure Console window
This window allows you to choose the refresh rate in the Console Timeout field (15 minutes, 30
minutes, 45 minutes, 60 minutes or Never). Select the protocol for communicating through the console
port, Console or SLIP, in the Serial Port field. Use SLIP for out-of-band management. If SLIP is being
used, you may also set the Baud Rate in the last field. Click Apply and then reboot the Switch for
console port settings to take effect.
The default serial port settings are:
♦ Baud Rate=9600
♦ Data Bits=8
♦ Flow Control=X on/X off
♦ Parity=None
♦ Stop Bits=1