D-Link DES-3624 - Manual (Page 70)

Stackable NWay Ethernet Switch User’s Guide
70 Using the Console Interface
Figure 6-26. Add/Remove IGMP Entry screen
The above screen is used to specify an agent to interface between IGMP and VLAN. The agents are assigned
to a VLAN and allow IGMP query and report packets to be present on the given VLAN. Only 12 agents can
exist on the switch at any one time.
Items in the above screen are described below:
♦ Action Adds/Removes an entry (agent) from the table.
♦ VID The VLAN number that you wish to create an agent for.
♦ Apply Adds the agent to the table.
Go back to the IEEE 802.1q IGMP Configuration menu and choose Configure IGMP Control Table in
order to activate/deactivate the agents and configure settings for them.
Choose Configure IGMP Control Table from the IEEE 802.1q IGMP Configuration menu to access the
IEEE 802.1Q IGMP Configuration screen: