D-Link DES-3624 - Manual (Page 95)

Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 95
Figure 6-50. Browse Address Table
To browse by MAC address, fill in the MAC address field, and then press FIND.
To browse by port number, select the desired Switch and Module in the respective fields, enter the number
of the Port you want to configure, and then press FIND.
The lower part of the screen is a read-only Browse Address Table that contains the Total Addresses in
Table, as well as the Switch, Module, Port, MAC Address, and Learned status of each entry. Use F3 to
advance to the next page and F4 to return to the previous page.
Switch History
The Network Monitoring menu allows the user to view the Switch history. This works like a trap and event
receiver except it only captures trap/events generated by the Switch itself. For example, the switch history
includes when the system is rebooted, when a console session is timed out, when a new link is established,
and when configuration is saved to flash memory.
To display the Switch History screen, choose Network Monitoring from the main menu and then choose
Switch History. The following screen appears: