D-Link DES-3624 - Manual (Page 96)

Stackable NWay Ethernet Switch User’s Guide
96 Using the Console Interface
Figure 6-51. Switch History screen
The switch history entries are listed chronologically from the last time the Switch was rebooted. Use the
following keys to move around the screen above: F3 – Page down, F4 – Page up, B – Begin, E – End, and C –
Clear Log. CTRL+R will refresh the screen.
Browse IGMP Status
The Browse IGMP Status function allows you to browse Internet Group Management Protocol (IGMP). The
Switch is able to recognize IGMP queries and reports sent between stations and an IGMP router. When
enabled for IGMP snooping, the Switch can open or close a port to specific devices based on the IGMP
messages sent from the device to the router or vice versa.
To display the IP Multicast Information screen, choose Network Monitoring from the main menu and
then choose Browse IGMP Status. The following screen appears: