3 autoclaving – Martin Christ RVC 2-33 CDplus User Manual
Page 66
Rotational Vacuum Concentrator RVC 2-33 IR
8 Maintenance and service
66
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
Translation of the original operating manual
Pos: 185 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /08 0 Wart ung un d Inst and haltu ng/ 080 -002 0 D esinfek tion v on R otork am mer un d Z ube hör @ 25 \mo d_1 404 985 2405 41_ 68. docx @ 18 7597 @ 2 @ 1
8.2
Disinfection of the rotor chamber and accessories
• Use commercially-available disinfectants such as, for example, Incidur
®
,
Meliseptol
®
, Sagrotan
®
, Buraton
®
or Terralin
®
(available at chemist’s
shops or drugstores).
• The rotational vacuum concentrator and the accessories consist of
various materials. A possible incompatibility must be considered.
• Before using cleaning or decontamination agents that were not
recommended by us, contact the manufacturer to ensure that such a
procedure will not damage the rotational vacuum concentrator.
• For autoclaving, consider the continuous heat resistance of the
individual materials.
• Please contact us if you have any queries (see chapter 8.4 - "Service").
DANGER
If dangerous materials (e.g. infectious and pathogenic substances) are
used, the RVC and the accessories must be disinfected.
Pos: 186 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 187 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 188 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /08 0 Wart ung un d Inst and haltu ng/ 080 -003 0 Au toklavie re n @ 2 5\m od_ 140 4985 244 279 _68. docx @ 18 761 1 @ 2 @ 1
8.3 Autoclaving
The service life of the accessories essentially depends on the frequency of
autoclaving and use.
• Remove the existing O-rings so that the trapezoid notch can be reached
by the hot steam. This prevents the formation of humidity in the notch..
• Replace the accessories immediately when the parts show changes in
colour or structure or in the occurrence of leaks etc.
Accessories
Max. temp
[°C]
Min. time
[min]
Max. time
[min]
Max. cycles
Glass tubes
134-138
3
40
-
Polycarbonate tubes
115-118
30
40
20
Polypropylene tubes
115-118
30
40
30
Teflon tubes
134-138
3
5
100
Aluminium rotors
134-138
3
20
-
Aluminium accessories
134-138
3
20
-
Pos: 189 /01 0 Univ ersal mod ule/Seit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1