Martin Christ RVC 2-33 CDplus - Manual (Page 63)

Rotational Vacuum Concentrator RVC 2-33 IR
8 Maintenance and service
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
63
Translation of the original operating manual
• Clean the cap and grease the O-ring of the cap slightly with vacuum
grease.
• Install the components or assemblies in a reversed order.
CAUTION
When installing the rotor shaft, ensure that the O-ring used to seal the
rotor chamber is fitted correctly.
• Grease the O-ring with vacuum grease to ensure that it does not get out
of place.
8 O-Ring of the rotor
shaft
Fig. 60: O-ring at the bottom of the rotor shaft
• Plug in the mains plug and switch the rotational vacuum concentrator
on.
• Perform a test run.
Pos: 178 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 179 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /08 0 Wart ung un d Inst and haltu ng/ 080 -001 0- 0030 Z ube hör @ 2 5\m od_ 1404 985 237 565 _68. docx @ 18 755 5 @ 3 @ 1