Labconco RapidVap Vacuum, N2 and N2/48 Evaporation Systems 7910015 - Manual (Page 8)

4
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 1: Introduction
• Important information is presented in capitalized
type in paragraphs that are preceded by the pointer
icon. It is imperative that the information contained
in these paragraphs be thoroughly read and
understood by the user.
• Information that is specific to a particular model of
RapidVap is preceded by a letter icon. The V icon
indicates the text is specific to the Vacuum model.
The N icon indicates the text is specific to the
RapidVap N
2
model.
Your Next Step
If your RapidVap needs to be installed, proceed to
Chapter 2: Prerequisites to ensure your installation site
meets all of the requirements. Then, go to Chapter 3:
Getting Started for instructions on how to install your
RapidVap and make all of the necessary connections.
For information on the operational characteristics of
your RapidVap, go to Chapter 4: Using Your
RapidVap.
If your RapidVap is installed and you need to perform
routine maintenance on the RapidVap, proceed to
Chapter 5: Maintaining Your RapidVap.
For information on making modifications to the
configuration of your RapidVap go to Chapter 6:
Modifying Your RapidVap.
Refer to Chapter 7: Troubleshooting if you are
experiencing problems with your RapidVap.
)
V N