Labconco RapidVap Vacuum, N2 and N2/48 Evaporation Systems 7910015 - Manual (Page 50)

46
Chapter 5: Maintaining Your RapidVap
Product Service Domestic 1-800-522-7658, International 816-333-8811
Monthly:
1. The rubber components on the RapidVap may
eventually deteriorate and require replacement. The
effective life of rubber parts depends upon both
their usage and the surrounding environment.
Check all rubber hoses and gaskets and replace any
that show signs of hardening, permanent set or
deterioration.
2. Using a soft cloth, sponge or chamois and a mild,
non-abrasive soap or detergent, clean the glass lid.
3. Using a soft cloth, sponge, or chamois and a mild,
non-abrasive soap or detergent, clean the exterior
surfaces of the unit. Liquid spray cleaners and
polishes may be used on the exterior surfaces. Do
not use solvents to remove stains from the exterior
surfaces as they may damage the finish.
4. All weekly activities.