Labconco Mini Stoppering Chamber - Manual

Labconco Instruction Sheet 1049200, Rev -, ECO H250 01/13 1 of 5
LABCONCO CORPORATION 8811 Prospect Ave, Kansas City, MO 64132
(816) 333-8811, Fax (816) 363-0130, (800) 821-5525
Labconco Small Stoppering Chamber 7569000
Introduction-
The Small Stoppering Chamber is ideal for Lyophilizing sample in small serum vials with split
stoppers. Once the samples are lyophilized the vials can then be stoppered while still under
vacuum. The chamber comes complete with PVC tubing and ½” adapter to connect directly to
the ports of Labconco’s Freeze Dry Chambers.
Installation of Small Chamber To Freeze Dry Chamber (Refer to Figure 1)
1. Place one end of the PVC Tubing over the ½ fitting on the side of the chamber and
secure with a clamp.
2. Insert the ½” Stainless Steel Adapter approximately 1” into the other end of the PVC
Tubing and secure with a clamp.
3. Insert the open end of the ½” adapter into one of the Ports on the Freeze Dryers
Chamber.
4. Position the switch on the Small Stoppering Chamber to the “CLOSE” position.
5. The Small Stoppering Chamber is now ready to use.
Figure 1