Hanna Instruments HI 903 - Manual (Page 78)

5-14
METHODS
5.5.10.3 Sample Type
This option allows the user to select the type of the sample: mass, volume or pieces.
This information is used to determine the appropriate sample size required by the titration
prior to analysis.
5.5.10.4 Sample Size
This option allows the user to enter the sample size. For external/Dissolution, enter the size
of the aliquot taken from the external vessel.
Before the titration is started, the user is asked again to enter the sample size. The sample
size (mass or volume) can be automatically acquired from the balance (when the balance
feature is enabled - see Section
4.11, Setup Balance Interface )