Hanna Instruments HI 903 - Manual (Page 115)

7-9
AUXILIARY FUNCTIONS
Operator Name: Allows the operator name to be recorded in each report.
Electrode Name: Allows the electrode name to be recorded in each report.
Fields 1, 2, 3: Allows any additional information to be recorded in each report.
The fields must be selected from the Setup Titration Report screen ( see Section 7.4.5,
Setup Titration Report ) in order to be displayed in the titration report.
7.4.4 Meter Information
Displays titrator configuration data.
Titrator Serial Number: The serial number of the titrator base board.
Analog Board Serial Number: The serial number of the titrator analog board.
Dosing Pump Serial Number: The serial number of the connected pump.
Titrator Software Version: The current software version installed on the titrator.
Base Board Software Version: The current software version present on the base board
of the titrator.
Dosing Pump Software Version: The current software version for the pump.
Analog Calibration Date: Manufacturer calibration date of analog board.
Note: If more than 1 year elapsed from the calibration date of the analog board, the
message Analog Calibration Due will appear on the main screen and analog
board recalibration must be performed.