Hanna Instruments HI 903 - Manual (Page 127)

8-11
MAINTENANCE, PERIPHERALS
8.3.3 Connecting a Printer
A variety of parallel printers can be connected to the parallel port of the titrator using a
standard DB25–pin cable.
Warning: The titrator and the external printer must both be OFF before they are connected.
Connect the external printer to the standard 25–pin Socket.
Turn on the titrator and then the printer.
8.3.4 Connecting to a Computer
The titrator can be connected to a computer using a USB cable. HI 900 PC application
needs to be installed on the PC.
Connect the cable to the USB port on the rear panel of the titrator.
Connect the cable to the USB port on the PC.