Hanna Instruments HI 903 - Manual (Page 59)

4-9
GENERAL OPTIONS
4.10 Restore Files from USB Storage Device
This screen allows the user to transfer files from the USB storage device to the titrator.
Insert the USB Storage Device into the USB port on the left side of the titrator.
The file types that can be transferred are:
Standard Method Files - HIxxxxyy.MTD (e.g.: HI8001EN.MTD, HI8101EN.MTD)
User Method Files - USERxxxx.MTD (e.g.: USER0001.MTD)
Drift/Titration Report Files - DR_xxxxx.RPT, KF_xxxxx.RPT
(e.g.: DR_00001.RPT, KF_00001.RPT)
Use the and keys to select the file type.
Use the and keys to scroll through the list.
The number of files and the name of each file found on the USB storage device is displayed
on the screen.
The option keys allow the following operations:
Returns to the General Options screen.
Copies the highlighted file from the USB storage device to titrator.
Copies all currently displayed files from the USB storage device to
titrator.
Deletes the highlighted file from the USB storage device.
Deletes all currently displayed files from the USB storage device.
Note: In order to restore files from USB Key, please ensure that the methods and/or reports
you wish to transfer to the titrator are in the correct folder:
- Methods: USB: \ Drive \ HI 903 \ Methods \ *.mtd
- Reports: USB: \ Drive \ HI 903 \ Reports \ *.rpt