beautypg.com

Cleaning lc connectors – EXFO BV10 Performance Endpoint Unit User Manual

Page 90

background image

Maintenance

84

BV10

Cleaning LC Connectors

Cleaning LC Connectors

Under normal circumstances the cleaning of the LC connector is not
required. However if the connector shows signs of debris or
contamination, cleaning may be required.

To clean a LC/SC/MPO-24 connector
1.
Use a clean dry air (CDA) or a air gun to blow out the dust or

contamination.

2. Re-inspect the connector.

3. If the connector is still not clean, use a commercial cleaner

recommended by the SFP manufacturer.

Note: Refer to the transceiver manufacturer for more detailed cleaning

recommendations and instructions.

Recycling and Disposal

(Applies to European Union Only)

For complete recycling/disposal information as per European Directive
WEEE 2012/19/UE, visit the EXFO Web site at

www.exfo.com/recycle

.