EXFO BV10 Performance Endpoint Unit - Manual (Page 22)

Physical Interfaces, LEDs, and Buttons
16 BV10
Port Availability on BV10
Port Availability on BV10
Connecting the TEST Port Interface
The BV10-100 provides an electrical 10/100 Mbit/s Ethernet Test interface
while the BV10-1000 provides an electrical 10/100/1000 Mbit/s and an
optical 1000 Mbit/s SFP laser Ethernet Test interfaces. The two BV10-1000
Test interfaces are mutually exclusive.
RJ45 Port
Connect the 10/100/1000 Mbit/s electrical interface to be tested to the RJ45
test port. The electrical ports is RJ45 for category 5 unshielded twisted pair
(UTP). Refer to Ethernet Cables on page 102 for cable specifications.
Supported electrical rates are:

For BV10-100: 10 Mbit/s and 100 Mbit/s.

For BV10-1000: 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s.
Port
Label
Description
Model
BV10-100 BV10-1000
TEST PORT 10/100 Mbit/s electrical RJ45 Test port (10Base-T and 100Base-TX) X
10/100/1000Mbit/s electrical RJ45 Test port (10Base-T, 100Base-TX
and 1000Base-T) X
1000 Mbit/s optical SFP Test port (1000Base-SX/LX/ZX;
850/1310/1550nm) X
LAN 10/100 Mbit/s electrical Management port X X
CONSOLE RS-232 DE-9F DCE (referred as DB9) Console port X X