EXFO BV10 Performance Endpoint Unit - Manual (Page 67)

CLI Command Reference
BV10-100 and BV10-1000 61
Configuration Commands
Console Commands
password set password
Description Defines a password for the BV10. By default, no password is set. The
password is case sensitive. When you enter a password, the CLI
prompts you to confirm the password by entering it again.
Syntax password set password
Example bv10-100> password set chidley
Please re-enter password
chidley
setting password
password clear
Description Clears the BV10 password.
Syntax password clear
Example bv10-100> password clear
clearing password
console telnet|ssh server enable|disable
Description Enables or disables the Telnet and/or SSH servers.
Before enabling SSH, you must set a password for the CLI (see
password set password on page 61). If you attempt to enable SSH
before setting a password, the following message is displayed:
Please set password first!
This command displays no output unless there is an error.
Syntax console telnet|ssh server enable|disable
Example bv10-100> console telnet server enable