beautypg.com

Connecting the power – EXFO BV10 Performance Endpoint Unit User Manual

Page 16

background image

Getting Started

10

BV10

Connecting the Power

Connecting the Power

The BV10 is available with either an AC power supply, DC +24 V connector,
or DC –48 V connector.

As soon as the BV10 is connected to a live power supply, the POWER LED
turns on. If the POWER LED does not turn on, there is a power failure at the
source or the unit is damaged. The STATUS LED indicates whether or not
the unit is ready for use. If the STATUS LED is off the unit is booting up. If it
is green or red the unit has booted (refer to STATUS on page 20).