EXFO BV10 Performance Endpoint Unit - Manual (Page 58)

CLI Command Reference
52 BV10
Operation Commands
Example bv10-100> show interface all
LAN PORT
IP_ADDRESS
= 10.17.16.32
NETMASK = 255.255.0.0
MAC_ADDRESS = 00:E0:0C:BC:E5:60
GATEWAY = 10.17.1.2
SPEED = 100Mb/s
DUPLEX = Full
LINK = yes
AUTO-NEG = on
DHCP = Disabled
VLAN = Disabled
MDI = 0
FLOW CONTROL =
TEST PORT
IP_ADDRESS
= 10.16.7.138
NETMASK = 255.255.0.0
MAC_ADDRESS = 00:03:01:FF:6B:70
GATEWAY = 10.16.1.1
SPEED = 1000Mb/s
DUPLEX = Full
LINK = yes
AUTO-NEG = on
DHCP = Disabled
VLAN = Disabled
MDI = Normal
FLOW CONTROL = None
TRANSCEIVER = Electrical
show interface