EXFO BV10 Performance Endpoint Unit - Manual (Page 61)

CLI Command Reference
BV10-100 and BV10-1000 55
Operation Commands
server discovery port
Description Sets the BrixWorx local registry port for communication. The default
port value is 80.
Syntax server discovery port IP address
Example bv10-100> server discovery port 80
server discovery write
Description Changes the IP address or Port number to the new value set by the
server discovery local|network|port|universal and saves the setting.
Once the configuration is changed, the Verifier is rebooted.
Syntax server discovery write
Example bv10-100> server discovery write
Writing changes...
Password:
Configuration changed
Rebooting verifier
Password:
./brix-verifier: line 31: /usr/bin/whoami: No such file or directory
Stopping the Brix Verifier Agent... done
Verifier application stopped
Password:
Starting verifier application
Password:
./brix-verifier: line 31: /usr/bin/whoami: No such file or directory
Starting the Brix Verifier Agent... done
Verifier application started