EXFO BV10 Performance Endpoint Unit - Manual (Page 54)

CLI Command Reference
48 BV10
Operation Commands
Syntax load image lan|test uri
The
URI
can use one of the following formats, depending on the server
type (TFTP or FTP) from which the unit is being updated:
tftp://192.168.1.1/image_name.img
ftp://username:[email protected]/image_name.img
Example bv10-100> load image lan tftp://10.17.1.75/BV-10_4.0SP1.img
WARNING: Performing image upgrade.
Please DO NOT power down!! Use CTRL-C to abort.
Shutting down processes for upgrade...done.
Transferring BV-10_4.0SP1.img from 10.17.1.75 using tftp...done(5149757 bytes).
Unpacking image file...done.
Writing to device(1)...done.
Writing to device(2)...done.
Updating configs...done.
Updating boot(1)...done.
Upgrade Successful!
*** Reboot is required! ***
load image