beautypg.com

Twamp enable|disable, Twamp udp-port value, Udp-echo enable|disable – EXFO BV10 Performance Endpoint Unit User Manual

Page 77

background image

CLI Command Reference

BV10-100 and BV10-1000

71

Configuration Commands

twamp enable|disable

Description Enables or disables the TWAMP Light application. TWAMP Light is

enabled by default.

Syntax

twamp enable|disable

Example

bv10-100> twamp disable
TWAMP disabled

twamp udp-port

value

Description Sets the TWAMP UDP listening port.

When UDP Echo is enabled, it uses port 7. If you attempt to set the

TWAMP UDP listening port to 7, the following error message is

displayed:

Command is not allowed - UDP Echo is enabled.

Syntax

twamp udp-port value

Example

bv10-100> twamp udp-port 4444
twamp udp-port 4444

udp-echo enable|disable

Description Enables or disables the UDP Echo application. UDP Echo is enabled by

default.

Syntax

udp-echo enable | disable

Example

bv10-100> udp-echo disable
UDP-ECHO disabled