EXFO BV10 Performance Endpoint Unit - Manual (Page 55)

CLI Command Reference
BV10-100 and BV10-1000 49
Operation Commands
Statistics Commands
show statistics
Description Displays the following status and statistics:
Smart Loopback Control (enabled or disabled)
Smart Loopback operational status
Link status of the test port
DHCP Status (when DHCP is enabled)
Laser control (optical transceiver only)
Number of processed Smart Loopback packets
Number of processed Ping requests on Test port only
TWAMP Light Control (enabled or disabled)
TWAMP Light UDP listening port
Number of processed TWAMP Light packets
UDP Echo Control (enabled or disabled)
Number of processed UDP Echo packets
Ethernet OAM Global Control (enabled or disabled)
Number of processed Ethernet OAM Loopback messages
Number of processed Ethernet OAM Delay Measurement messages
Number of processed Ethernet OAM Link Trace messages
Syntax show statistics
Example bv10-100> show statistics
Smart Loopback Control
= enabled
Smart Loopback Status
Link = 1
DHCP = enabled (lease acquired)
Smart Loopback Packets = 731
Ping Packets = 408
TWAMP Light Control = enabled
TWAMP Light UDP port = 9495
TWAMP Light Packets = 0
UDP Echo Control = enabled
UDP Echo Packets = 0
Ethernet OAM Control = enabled
Ethernet OAM Loopbacks Packets = 70
Ethernet OAM Delay Meas. Packets = 55
Ethernet OAM Link Trace Packets = 42