EXFO BV10 Performance Endpoint Unit - Manual (Page 36)

Introducing the BV10 CLI
30 BV10
Connecting to the BV10 to a Console
Connecting to the BV10 to a Console
Connect the BV10 to a Console for management through CONSOLE, LAN,
or TEST port.
CONSOLE Port
A console is directly connected to the BV10 (CONSOLE Port). The
CONSOLE port is always available for CLI use.
To use the CONSOLE port:
1. Ensure that your PC is connected to the BV10‘s CONSOLE port. Refer to
CONSOLE Port on page 19.
2. Use a terminal application to connect with the BV10 through its
CONSOLE port.
2a. Start the terminal application.
2b. Set the connection configuration to 9600bps, 8 data bits, no parity,
1 stop bit (9600/8-N-1).
2c. Establish the connection with the BV10.