EXFO BV10 Performance Endpoint Unit - Manual (Page 57)

CLI Command Reference
BV10-100 and BV10-1000 51
Operation Commands
Interface Information Command
show interface
Description Displays information about the LAN, Test, or both ports.
For the LAN and TEST ports:
IP address
Net Mask
MAC Address
Default Gateway
Speed
Duplex
Link status
Auto-negotiation status
DHCP status
VLAN
MDI/MDI-X status
Flow control
Transceiver type (Test port on BV10-1000 only)
Additional information for BV10-1000 optical port:
Laser Control
SFP vendor manufacturing information (as per SFF-8472): ID,
Part Number, Serial Number, Vendor Name, Connector Type
(e.g.: LC, MT-RJ...), Speed, Type (for example: SR, IR, LR),
Wavelength, and Mode (SMF or MMF).
Syntax show interface all|lan|test