EXFO FastReporter 2 - Manual (Page 57)

Working with Projects (FR2-FC Mode)
Post Processing Software 47
Changing File Direction
Changing File Direction
Changing the direction for your measurement is useful when you create
your reports. For OTDR and iOLM test files, changing the file direction can
be useful to create bidirectional and virtual bidirectional files.
To change the direction of the measurement or file:
1. Select the required measurement or file from the Measurement or
Files window.
Note: You can select multiple measurements change the direction if the direction
is supported by the measurements.
2. On the File menu, point to Direction, and click A->B or B->A to set the
direction.