EXFO FastReporter 2 - Manual (Page 210)

Working with Fiber Inspection Probe (FIP) files
200 FastReporter 2
Modifying Unit Model and Unit Serial Number
Modifying Unit Model and Unit Serial Number
The application allows you to change the unit model as well as the unit
serial number for your FIP measurements on .cmax format files. You can
change the unit model and unit serial number of multiple measurements at
a time. The entered unit model and unit serial number are also displayed in
the FIP report.
Note: In .cmax2 format files, the unit model and serial number cannot be
modified.
To change the unit model:
1. Open the FIP measurements to change.
2. On the Results window, in the Identification tab, double-click on the
Unit model field and enter the required unit model number.
Note: You cannot enter special characters (?,/,<,>,",:,*, |,\).
Note: You can enter a maximum of twenty five characters.