EXFO FastReporter 2 - Manual (Page 228)

Working with iOLM files
218 FastReporter 2
Modifying iOLM Thresholds
3. In the Results window, select the Thresholds tab.
4. Select the wavelengths for which you want to view or modify the link
or element pass/fail thresholds values.
5. If desired, you can select a certification in the list of available choices.
This will display the threshold values associated with this particular
type of certification. You cannot modify the thresholds displayed for
them.
If no certification are available, the certification configuration name is
set to Custom, and you can modify the thresholds as needed by
clicking the corresponding Apply box, then modifying the value in the
table.
Note: If you have selected more than one wavelength, all of them will be
modified at the same time.
6. If you want to change the splitter loss ratio values, proceed in the same
manner as you have for the thresholds.
7. If you want to apply the default values for the selected wavelength(s),
click Default Settings.