EXFO FastReporter 2 - Manual (Page 164)

Working with OTDR Files
154 FastReporter 2
Displaying Statistics for Measurements
Displaying Statistics for Measurements
When displaying matched measurements, it might be useful to view
statistics for them. The statistics are displayed for:

Fibers (includes loss for splices, connectors and sections, reflectance
for connectors, and attenuation data for sections), which are displayed
on the far right of the Events Table tab.

Events and Sections (includes event position, loss and reflectance,
section length, loss and attenuation), which are displayed at the
bottom of the Events Table tab.
The statistics displayed are the minimum value, the maximum value, and
an average for the selected files. If you click on the minimum and
maximum values, the corresponding event is highlighted in the Graph or
Linear views, and in the events table.
Note: You must have enabled the corresponding item for the statistic to appear.
For example, if you chose not to display the positions, the corresponding
statistic is also hidden.
To display the statistics:
1. Select the multiple measurements for which you want to view the
statistics.
2. In the Events Table tab, right-click in one of the fixed columns, and
select the type of statistics you want to view.