beautypg.com

Recharging the battery, Aution, Mportant – EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile User Manual

Page 74

background image

Maintenance

66

FIP-400B

Recharging the Battery

Recharging the Battery

The battery in your Fiber Inspection Probe is a Li-ion polymer battery with
three-cell format. The charge status is shown with the LEDs on the Fiber
Inspection Probe. The ConnectorMax2 Mobile software application also
indicates the charge status.

C

AUTION

Only charge the battery with the USB cable and adapter/charger
provided by EXFO with your unit.

You can purchase a new battery from EXFO.

I

MPORTANT

The battery is not charged at the factory. You must fully charge
it before using the unit for the first time. The battery is fully
charged after a few hours or when the battery LED indicator
stops flashing. The charge cycle starts and stops automatically.

The time required to charge the battery depends on various
factors such as the ambient temperature.

To ensure that the battery functions or charges properly, keep it
within operation and storage temperature range.