EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile User Manual
Page 20
Safety Information
12
FIP-400B
Electrical Safety Information
Equipment Ratings
Temperature
Operation
Unit powered by batteries: -10 °C to 40 °C
(14 °F to 104 °F)
Unit connected to USB adapter: 0 °C to 40 °C
(32 °F to 104 °F)
Storage
Unit without batteries: -40 °C to 70 °C
(-40 °F to 158 °F)
Unit with batteries: -20 °C to 60 °C
(-4 °F to 140 °F)
Relative humidity
a
a.
Measured in 0 °C to 31 °C (32 °F to 87.8 °F) range, decreasing linearly to 50 % at 40 °C (104 °F).
unit: 95 % non-condensing
USB adapter: 5 % to 95 % for storage and 8 % to 90 %
for operating temperature
Maximum operation altitude
2000 m (6562 ft) (unit connected to USB adapter)
3000 m (9843 ft) (unit operated from batteries)
Pollution degree
2 (unit connected to external power supply)
3 (unit operated from batteries)
b
b.
Equipment must be normally protected against exposure to direct sunlight, precipitation and full wind
pressure.
Overvoltage category
unit: I
AC adapter: II
Measurement category
Not rated for measurement categories II, III, or IV
Input power
c
c.
Not exceeding ± 10 % of the nominal voltage.
unit: 5 VDC; 1.8 A
USB adapter:
100 - 240 Vac; 50 Hz to 60 Hz;
0.4 A Max