EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile User Manual

Page 34

Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile

FIP-400B

Setting up the Increment

After a result is saved, you have to return to the Live Video mode so that the
application prepares the next file name by incrementing (or decrementing)
the suffix.

Note: If you choose not to save a particular file, the suggested file name remains

available for the next capture. This applies to all type of connectors.

You can select the number of digits displayed for the incremented or
decremented values.

Select "#" if you want to keep the value exactly in the same format as
defined in the start and stop values. If a value is to be incremented from 1
to 10, it becomes 1, 2, 3, ... 9, 10. One "#" is the default format.

Select two, three, or four "#" if you want all values to be expressed with the
same number of digits. The application fills the empty spaces with zeros
before the increment or decrement to ensure the appropriate format is
displayed. For example, if you select two "#" and the value is to be
incremented from 1 to 10, it becomes 01, 02, 03, ... 09, 10.