EXFO FIP-425B/435B Fiber Inspection Probe and ConnectorMax2 Mobile - Manual (Page 39)

Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 31
Selecting Test Configurations
Selecting Test Configurations
If you are testing single fibers, you can select specific test configurations
according to the type of fiber you are analyzing, the connector type or the
type of anomaly you are looking for.
When working with the smart device, you can hide some test
configurations with the eye icon.
Note: You cannot hide the current test configuration.
To select a test configuration:
1. From the main window, tap the at the end of the Test
Configuration row.