EXFO AXS-100 Series OTDR - Manual (Page 54)

Testing Fibers
46 AXS-100 Series
Testing in Manual (Advanced) Mode
8. Select pulse as follows:
8a. Use the arrows to select the Pulse list and press Enter to open the
list.
8b. Use the up/down arrows to select the desired pulse, and then
press Enter.
9. Select duration of the acquisition as follows:
9a. Use the arrows to select the Duration list, and then press Enter to
open the list.
9b. Use the up/down arrows to select the desired duration for the
acquisition, and then press Enter to confirm.
10. Press F
AS
T
RACE
to start the acquisition.
You can stop the acquisition at any time by pressing F
AS
T
RACE
once
again.