EXFO AXS-100 Series OTDR - Manual (Page 106)

Testing Network Connections
98 AXS-100 Series
Setting Storage Parameters for Ping Tests
Setting Storage Parameters for Ping Tests
Each time you save ping results, the unit suggests a file name based on
autonaming settings. After saving a result, the unit prepares the next file
name by incrementing the suffix.
File names: maximum 20 characters for prefix, 3 digits for number.
Ping results are saved in text (.txt) format.
To set the ping autonaming scheme:
1. Press Menu, select Setup > Ping, and then
press Enter.
2. Use the left/right function arrows until you
see Storage, and then display the pane
(F1/F2 key).
3. Use the arrows to select the file name prefix or file name suffix.
4. Press Enter to display the on-screen keyboard (for details about using
keyboards, see Using Menus and Keypad on page 13).
5. Set the name or value, and then press OK (F1/F2 key) to hide the
keyboard.
To revert to the factory-default autonaming scheme:
1. Press Menu, select Setup > Ping, and then press Enter.
2. From the Storage pane, use the arrows to select Default, and then
press Enter to confirm.