beautypg.com

Replacing batteries, Arning – EXFO AXS-100 Series OTDR User Manual

Page 114

background image

Maintenance

106

AXS-100 Series

Replacing Batteries

Replacing Batteries

As soon as you remove the battery compartment door, the unit will turn
itself off.

To replace main batteries:
1.
Open the battery compartment door located

at the back of the unit.

2. Lift the mobile part of the battery lock and

turn it 90

o

clockwise.

The base of the battery lock will fit in the
groove between the two batteries.

3. Replace both batteries, respecting the polarity.

4. Lift the mobile part of the battery lock and turn it 90

o

counterclockwise

to secure the batteries in place.

For optimum reliability, put the battery lock back in place, as shown in
the figure above.

5. Close the battery compartment door; you cannot turn on the unit if the

battery door is open.

W

ARNING

Do not throw batteries into fire or water and do not short-circuit
the batteries’ electrical contact. Do not disassemble.

Battery

lock