EXFO AXS-100 Series OTDR - Manual (Page 107)

Testing Network Connections
OTDR 99
Setting Storage Parameters for Trace Route Tests
Setting Storage Parameters for Trace Route
Tests
Each time you save trace route results, the unit suggests a file name based
on autonaming settings. After saving a result, the unit prepares the next file
name by incrementing the suffix.
File names: maximum 20 characters for prefix, 3 digits for number.
Trace route results are saved in text (.txt) format.
To set the trace route autonaming scheme:
1. Press Menu, select Setup > Trace Route,
and then press Enter.
2. Use the left/right function arrows until you
see Storage and display the pane
(F1/F2 key).
3. Use the arrows to select the file name prefix, or file name suffix.
4. Press Enter to display the on-screen keyboard (for details about using
keyboards, see Using Menus and Keypad on page 13).
5. Set the name or value, and then press OK (F1/F2 key) to hide the
keyboard.
To revert to the factory-default autonaming scheme:
1. Press Menu, select Setup >Trace Route, and then press Enter.
2. From the Storage pane, use the arrows to select Default, and then
press Enter to confirm.