EXFO AXS-100 Series OTDR - Manual (Page 33)

OTDR 25
Setting General OTDR Parameters
To set the general OTDR parameters:
1. Press Menu, select Setup > OTDR, and then
press Enter.
2. Display the General pane (F1/F2 key).
3. Use the up/down arrows to highlight the
desired item, and then press Enter to
select it.
You can press Enter one more time to clear the boxes.
To revert to the factory-default settings:
1. Press Menu, select Setup > OTDR, and then press Enter.
2. From the General pane, use the arrows to select Default, and then
press Enter to confirm.