EXFO AXS-100 Series OTDR - Manual (Page 28)

Customizing Your OTDR
20 AXS-100 Series
Configuring the Power Management Settings
Configuring the Power Management Settings
When you do not use the unit for a while, the display may be dimmed to
save power.
You can set idle durations for AC adapter/charger and battery operation.
The unit goes in suspend mode after the specified duration has expired
(see Turning the Unit On and Off on page 11).
Values are kept in memory when you turn the unit off.
Note: When the backlight is dimmed, the unit operation is not interrupted. Press
any key to return to normal operation.
To configure the power management settings:
1. Press Menu, select Setup > Unit, and then
press Enter.
2. Use the left/right function arrows until you
see Power, and then display the pane
(F1/F2 key).
3. Use the up/down arrows to go to the Turn
off backlight or Turn off unit section.
4. Use the up/down arrows to select the battery or AC adapter/charger
duration list, and then press Enter to open the list.
5. With the current duration highlighted, use the up/down arrows to
select the desired duration (or Never), and then press Enter to confirm.