EXFO AXS-100 Series OTDR - Manual (Page 25)

Customizing Your OTDR
OTDR 17
Setting the Date and Time
Setting the Date and Time
When saving results, the unit also saves the corresponding date and time.
You must enter the date according to the year-month-day format and the
time according to the 24-hour format.
You can also modify the time zone.
To set the date and time:
1. Press Menu, select Setup > Unit, and then
press Enter.
2. Use the left/right function arrows until you
see Regional Settings, and then display the
pane (F1/F2 key).
3. Use the arrows to select any of the date or
time settings, and then press Enter to display the on-screen keyboard
(for details about using keyboards, see Using Menus and Keypad on
page 13).
4. Enter the new value and press OK (F1/F2 key).
To modify the time zone:
1. Press Menu, select Setup > Unit, and then
press Enter.
2. Use the left/right function arrows until you
see Regional Settings, and then display the
pane (F1/F2 key).
3. Use the arrows to select the Time zone list,
and then press Enter to open it.
4. With the current time zone highlighted, use the up/down arrows to
select the desired time zone, and then press Enter to activate it.