Nvidia 3d shutter glasses kit – Eurocom X7 User Manual
Page 323
NVIDIA Video Driver Controls
NVIDIA 3D Shutter Glasses Kit C - 23
C
NVIDIA 3D Shutter Glasses Kit
(for Model C Computers Only)
The NVIDIA 3DVISION shutter glasses kit is supported only by Model B comput-
ers with a 17.3"(43.94cm) FHD 120Hz panel and GTX 680M video card. Install the
video driver as indicated in
“Video (VGA) - NVIDIA” on page 4 - 6
.
The NVIDIA 3DVISION shutter glasses kit is supplied with a single pair of shutter
glasses and all necessary cables etc. Set up the hardware (run the set up wizard as
indicated overleaf) as instructed in the manual supplied with the kit, however make
sure you have installed the NVIDIA driver (see
) from the
Device Drivers & Utilities + User’s Manual disc. For further
details contact your distributor/supplier.
After the NVIDIA driver has been installed you can setup NVIDIA 3D Vision.
NVIDIA Driver
Install the NVIDIA driv-
er (see
)
from the Device Driv-
ers & Utilities + User’s
Manual disc (to ensure
compatibility).
Important Safety Instructions
Make sure you read all the enclosed safety instructions and precautions included in the NVIDIA 3D
Vision Kit before setting up the 3D Glasses and IR Emitter. Follow the setup instructions provided in
the documentation to set up the 3D Vision kit safely and take the “User Vision Test,” which will initiate
when you turn on your GeForce 3D Vision for the first time. If you cannot see the image in 3D during
the test, you should DISCONTINUE USE IMMEDIATELY. Continued use may result in health-related
complications.