Eurocom X7 User Manual

Page 283

Text mode
Original mode

Troubleshooting

Problems and Possible Solutions 8 - 19

17. Go to RAID Level: and press .
18. Choose the RAID Level required (see

Table 7 - 1, on page 7 - 3

for details) and press .

• RAID0 (Stripe)
• RAID1 (Mirror)
• Recovery

19. Go to any of the disks listed under Select Disks: and select a disk name and press .
20. Move the cursor down (use the arrow keys) onto to X (o select the disk required and press .

• If you have selected a Recovery level RAID then you need to select one disk to be Master disk (M) and one

disk to be the Recovery disk (R)

Figure 8 - 5

- Select Disks (Advanced > Intel(R) Rapid Storage Technology)

For Recovery

For Stripe or Mirror