Eurocom X7 User Manual

Page 287

Text mode
Original mode

Troubleshooting

Problems and Possible Solutions 8 - 23

Changing the System from RAID to AHCI Mode to IDE Mode

If you wish to change from a RAID mode to AHCI or IDE modes you will need to delete any existing RAID by
following the procedure below. However backup up any necessary files and data before deleting a RAID, as
doing so will result in the loss of all data on the RAID volumes.

Start-up your notebook computer and press to enter the BIOS.

Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and press .

Go to the RAID (listed under RAID Volumes:) and press .

Select Delete and press .

Select “Yes” (note that al the data on the volumes will be lost) and press .

Figure 8 - 8

- Delete RAID (Advanced > Intel(R) Rapid Storage Technology)