beautypg.com

Elenco AM/FM Radio Kit User Manual

Page 63

background image

-62-

3. Bend the top side upward as shown.

4. Bend the two sides upward. Attach the

three sides using scotch tape or glue
(Elmer’s, Duco Cement, or other).

5. Bend the bottom side upward and attach it

to the other sides using scotch tape or glue.
Bend the two mounting flaps down.

Side View

Back View

6. Place the baffle over the speaker. Align the

mounting holes and attach it using the two
screws and two nuts supplied. The screws should
go through the X mark on the baffle flap.

Optional: To make an air tight seal, place a bead of
glue between the PC board and the baffle edges.

Baffle

PC board

Screw

Screw

Glue

Nut

Nut