Echelon Neuron User Manual
Page 65
Neuron Tools Errors Guide
57
NCC#
Description
93
Network variable declaration not permitted if micro_interface [NCC#93]
Once the #pragma micro_interface directive appears, the program cannot
declare any network variables or message tags. See the
Compiler
Directives
chapter in the
Neuron C Reference Guide
.
94
Network variable base type cannot contain unbounded array [NCC#94]
Network variable arrays must be declared with a fixed bound that is a
compile-time constant.
95
96
Network variable base type cannot contain function [NCC#95]
Network variable base type cannot contain pointer [NCC#96]
A network variable type cannot contain pointer types, addresses or function
address types.
97
Too many timers declared [NCC#97]
Neuron C supports a maximum of 15 application timer objects of all types
together.
98
I/O objects can only be declared at file scope [NCC#98]
Some Neuron C objects may only be declared at file scope. Thus, they are
restricted to being globals, not automatics. These objects are timer objects,
message tags, I/O objects, and network variables.
99
100
101
This I/O object type can only be ‘output’ [NCC#99]
This I/O object type can only be ‘input’ [NCC#100]
Must specify ‘input’ or ‘output’ for this I/O object type [NCC#101]
Some Neuron C I/O object types can only be input, some can only be output,
and some can be either. For the case where the direction is known from the
I/O object type, the programmer need not specify the direction, but if
specified, it must be the correct direction. For the case where the direction
is not known from the I/O object type, the programmer must specify it.
102
103
104
105
106
107
108
109
110
111
I/O object type restricted to pins IO_0 through IO_4 [NCC#102]
I/O object type restricted to pin IO_0 [NCC#103]
I/O object type restricted to pins IO_0 through IO_7 [NCC#104]
I/O object type restricted to pins IO_0 or IO_1 [NCC#105]
I/O object type restricted to pins IO_4 through IO_7 [NCC#106]
I/O object type restricted to pins IO_4 or IO_6 [NCC#107]
I/O object type restricted to pin IO_10 [NCC#108]
I/O object type not allowed on pin IO_7 or IO_10 [NCC#109]
I/O object type restricted to pin IO_8 [NCC#110]
I/O object type restricted to pin IO_4 [NCC#111]
Different I/O object types are permitted on different subsets of the Neuron
Chip’s I/O pins. For more information, see the
I/O Model Reference
.