Echelon Neuron - Manual (Page 144)

136 Neuron Exporter Errors (NEX)
NEX# Description
4011 No domain ID was specified for the desired configuration. A zero-length domain
is assumed [NEX#4011]
This warning will occur whenever an image is to be exported into the
cloned domain, without a domain ID and/or domain ID length being given.
A device that has the clone domain flag raised must still have a valid
domain/subnet/device configuration. The warning indicates that the
problem has been recognized, a zero-length domain is being assumed, and
the export continues.
4012 Both subnet and device ID must be zero for the desired configuration. The
specified values are being ignored [NEX#4012]
A non-zero value for the subnet ID and/or device ID has been specified,
leading to an invalid configuration. These values are being ignored and the
image is exported in the desired state.
Verify that the image has been exported into the correct state, and/or
specify the correct subnet/device ID values as needed.
4014 The hardware semaphore and the__ lock{} construct are not operational at this
clock setting [NEX#4014]
The hardware semaphore (and the __lock {}construct) are only operational
in clock configurations in which the interrupts are executed in a separate
execution context from the application context. Requesting the semaphore
(entering the
__lock clause) will always succeed immediately for a non-
operational semaphore.