Echelon Neuron User Manual
Page 30
22
LonTalk Interface Developer Errors (LID)
LID#
Description
40
Cannot find required symbol in Micro Server's symbol file
Refer to the error message for the symbol name. The Micro Server's symbol
table can be read but lacks a required symbol. Be sure to use a standard
Micro Server.
This error code applies only to a ShortStack Micro Server.
42
A type definition cannot be generated -- the type definition has more elements
than expected
Delete all intermediate files. Re-run the LonTalk Interface Developer
utility in Trace verbosity mode and carefully examine the LonTalk
Interface Developer utility Summary window to determine the root cause of
the failure. If the problem persists, contact Echelon technical support,
submitting all files produced by the LonTalk Interface Developer utility
when running in Trace verbosity level.
43
Explicit addressing is requested by the user or required by the model file but is
not supported by the Micro Server
Choose a different Micro Server, or remove the need for explicit addressing.
This error concerns “explicit addressing” and not “explicit messages.” A
Micro Server must explicitly support explicit addressing of explicit
messages (unbound messages). Explicit messages that use implicit
addressing (bound messages) can be used with any Micro Server.
This error code applies only to a ShortStack Micro Server.
44
A custom image is required for the chosen transceiver type
The ShortStack Micro Server images included with the ShortStack
Developer's Kit can only be used with FT and PL Smart Transceivers.
This error code applies only to a ShortStack Micro Server.
45
The selected Micro Server image cannot be used with a clock rate derived from
6.5536 MHz
This error code applies only to a ShortStack Micro Server.
46
One or more configuration parameters implemented within a file are present,
FTP or DMF must be implemented
Alternatively, you can declare configuration properties as configuration
network variables.
47
The file transfer protocol (FTP) and direct memory files (DMF) access
mechanisms are mutually exclusive
48
The chosen Micro Server is based on firmware version
not support the direct memory files
This error code applies only to a ShortStack Micro Server.