ADLINK AMP-208C - Manual (Page 48)

34 Getting Start with The Installation
• IOIF4:
• CN1:
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 DO9 O
Additional isolated digital
output, (9)
6 DO14 O
Additional isolated digital
output, (14)
2 DO10 O
Additional isolated digital
output, (10)
7 DO15 O
Additional isolated digital
output, (15)
3 DO11 O
Additional isolated digital
output, (11)
8 DO16 O
Additional isolated digital
output, (16)
4 DO12 O
Additional isolated digital
output, (12)
9 DOCOM -- Digital output common
5 DO13 O
Additional isolated digital
output, (13)
-- -- -- --
NOTE NOTE
1. Please connect DICOM to external power supply
(24VDC in general) if possible.
2. Please connect DOCOM to ground (GND) of
external power supply if possible.
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 EDO4+ O Digital output (+), (4)
6 EDO4- O Digital output (-), (4)
2 TG1+ O Trigger output (+), (1)
7 TRG1- O Trigger output (-), (1)
3 TRG2+ O Trigger output (+), (2)
8 TRG2- O Trigger output (-), (2)
4 Rsv. -- Reserved
9 DGND -- Digital ground
5 Rsv. -- Reserved